Standards

This standard applies to electric cooking and heating appliances and to electric ,motor-operated or magnetically-driven appliances for household and similar purposes, including office machines.

This part of ISO 2859 specifies sampling plans and procedures for inspection by attributes of discrete items. it is indexed in terms of the Acceptable Quality Level (AQL).

This specification covers chlorinated poly(vinyl chloride) (CPVC) pipes made in standard thermoplastic pipe dimension ratios and pressure rated for water. (See Appendix). Included are criteria for classifying CPVC plastic pipe materials and CPVC plastic pipe, and requirements and test methods for materials, workmanship, dimension, sustained pressure, burst pressure, flattening, and extursion quality. Methods of marking are also given.

This Standard applies to self-contained household refrigerators and freezers designed to be installed and used in residential occupancies in accordance with the Canadian Electrical Code, Part 1, CSA Standard C22.1, and the National Electrical Code, ANSI/NFPA 70.

This Standard specifies requirements for rolls of one ply and two toilet tissue. The standard also prescribes labelling requirements, sampling and method of test. It does not cover facial tissue or paper towels.

This standard specifies attachment fused and unfused plugs (caps), shuttered receptacles (sockets) for flush surface mounting. These plugs and sockets are suitable for alternating current circuits only of voltages not exceeding 250 volts and currents not exceeding 15 amperes.  The plugs and receptacles covered by this standard are intended for use in making readily detachable electrical connections in non-hazardous locations between supply circuits and portable lamps, appliances and similar equipment.

This standard applies to the construction installation, operation, inspection, and maintenance of jacks; power operated cranes, monorails and crane run-ways; power operated and manually operated derricks and hoists; lifting devices, hooks and slings; and cableways.  This standard does not apply to track and automotive jacks, railway or automobile wrecking cranes, shipboard cranes, shipboard cargo – handling equipment, well-drilling derricks, ship hoists, mines hoists, truck body hoists, car or barge pullers, conveyors, excavating equipment, nor to equipment coming within the scope of the following American National Standards Committee: A10, A17, A90, A92, A120, B20, B56 and B77.

his standard applies to the construction, installation, operation, inspection, and maintenance of jacks; power operated cranes, monorails and crane run-ways; power operated and manually operated derricks and hoists; lifting devices, hooks and slings; and cableways. This standard does not apply to track and automotive jacks, railway or automobile wrecking cranes, shipboard cranes, shipboard cargo – handling equipment, well-drilling derricks, ship hoists, mines hoists, truck body hoists, car or barge pullers, conveyors, excavating equipment, nor to equipment coming within the scope of the following American National Standards Committee: A10, A17, A90, A92, A120, B20, B56 and B77.

Within the general scope defined in Section I, ANSI/ASME B30.17 applies to overhead and gantry cranse with a top running bridge, of single-girder construction, utilizing one or more underhung hoists (see ANSI B30.16) operating on the bottom flange of the bridge girder. This Standard includes both power-driven and hand-operated equipment.

This standard specifies requirements for bread including buns and rolls and methods of test for these requirements.