This part provides standardized calculation methods for the determination of meter factors under defined conditions, regardless of the point of origin or destination or units of

measure required by governmental customs or statute. The criteria contained here will allow different entities using various computer languages on different computer hardware (or by manual calculations) to arrive at identical results using the same standardized input data. 

This document also specifies the equations for computing correction factors, including the calculation sequence, discrimination levels, and rules for rounding to be employed in the calculations. No deviations from these specified equations are permitted, since the intent of this document is to establish a rigorous standard.

This standard can be purchase via the American Petroleum Institute (API) webstore: https://www.apiwebstore.org/standards/12_2_4  

This part of ISO/IEC 9314 specifies the Media access control (MAC) , the middle sublayer of the data link layer (DLL) for fiber distributed data interface (FDDI) .FDDI (ISO/IEC 9314) provides a high -bandwidth (100 Mbit/s).general - purpose interconnection among information processing systems, subsystems and peripheral equipment , using fiber optics or other transmission media. FDDI can be configured to support a sustained data transfer rate of at least 80 Mbit/s (10 Mbytes/s). FDDI provides connectivity for many nodes distributed over distances of many kilometers in extent . Certain default parameter values for FDDDI (e.g. timer settings) are calculated on the basis of up to 1000 transmission links or up to 200 km total fiber path length (typically corresponding to 5000 nodes and 100 km of dual fiber cable, respectively), however, the FDDI protocols can support much larger networks by increasing these parameter values.

This part of ISO/IEC 18026 provides an overview of different techniques of security gateways, of components and of different types of security gateway architectures, it also provides guidlines for selection and configuration of security gateways.

This part of ISO/IEC 20000 defines the requirements for a service provider to deliver managed services of an acceptable quality for its customers

This part of ISO/IEC 20000 represents an industry consensus on quality standards for IT service management processes . These service management processes deliver the best possible service to meet a customer's business needs within agreed resource levels, i.e. Service that is professional cost-effective and with risks which are understood and managed.

The fieldbus data link layer provide basic time-critical messaging communication between devices in an automation environment. The purpose of this part of IEC 61158 is to define eight distinct and non- interoperable fieldbus Data link protocols. Each protocol defined in this standard is most most closely related to and lies within the field of application of the corresponding services of IEC 61158-3. the fieldbus data link services definition .

This part of IEC 61850 specifies the specific communication service mappings for the communication between bay and process level and if specifies a mapping on a serial unidirectional multidrop point point to point link in accordance with IEC 60044-8. This part of IEC 61850 specifies a mapping of the abstract service for the transmission of sampled values ( as defined in IEC 61850-7-2 ) on a serial unidirectional multidrop point link in accordance with IEC 60044-8. It applies to the communication between merging units of electronic current (ECT) or voltage-transformers (EVT) and bay devices such as protection relays. If higher requirements on sampling rate. further sampling measured value data sets in addition to the universal data set. inter-bay communication and synchronization apply, these will be covered by IEC 61850-9-2 Figure 1 show the schematics of this interface.

This part of IEC defines the specific communication services mapping (SCSM) for the transmission of sampled values according to the abstract specification in IEC 61850-7-2. The mapping is that of the abstract model on a mixed stack using access to an ISO/IEC 8802-3 link for the transmission of the samples in combination with IEC 61850-8-1.

This part of the ISO/IEC 9314 specifies the Media access control (MAC) the middle sublayer of the data link layer (DLL) for fiber distributed data interface (FDD). FDDI (ISO/IEC 9314) provides a high- bandwidth (100 Mbits) general - purpose interconnection among information processing systems, subsystems and peripheral equipment, using fiber optics or other transmission media. (FDDI can be configured to support a sustained data transfer rate of at least 80 Mbits/s (10 Mbyte/s). FDDI provides connectively for many nodes distributed over distances of many kilometers in extent. Certain default parameter values for FDDI (eg. timer settings) are calculated on the basis of up to 1000 transmission links or up to 200 km total fiber path length (typically corresponding to 500 nodes and 100 km of dual fiber cable, respectively) however, the FDDI protocols can support much larger networks by increasing these parameter values.

This International standard defines an input/output bus for interconnecting computers and peripheral devices. It defines extensions to the small computer system interface (ISO 9316:1989), referred to herein to herein as SCSI-1. Its also provides more complete standardization of the previously characteristics of the interface to allow inter-operability of conforming devices. This International standards is referred to herein as SCS1-2. The term SCS1 is used wherever it is not necessary between the two version