Standards

This part of ISO 2859 specifies sampling plans and procedures for inspection by attributes of discrete items. it is indexed in terms of the Acceptable Quality Level (AQL).

This standard specifies attachment fused and unfused plugs (caps), shuttered receptacles (sockets) for flush surface mounting. These plugs and sockets are suitable for alternating current circuits only of voltages not exceeding 250 volts and currents not exceeding 15 amperes.  The plugs and receptacles covered by this standard are intended for use in making readily detachable electrical connections in non-hazardous locations between supply circuits and portable lamps, appliances and similar equipment.

The standards and requirements in this document are the pre-requisite conditions for the issuance of a Technical Acceptance certificate (TAC) for television broadcasting transmitters.

This standards covers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80C (176 F) and lower temperatures on joints and splices in wires and cables in accordance with the National Electrical Code. It is intended that rubber tape on a joint or splice be mechanically protected by a covering such as friction tape . Thermoplastic tape is acceptable without the additional mechanical protection.

This standard covers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80 C (176 F) and lower temperatures on joints and splices in wires and cables in accordance with the National Electrical Code.. It is intended that rubber tape on a joint or splice be mechanically protected by a covering such as friction tape . Thermoplastic tape is acceptable without the additional mechanical protection.

BESP 100, Issue 1, November 1, 1996. This procedure describes the process for obtaining a Technical Acceptance Certificate (TAC) for Broadcasting Equipment.

This International Standard provides guidelines beyond the requirements given in ISO 9001 in order to consider both the effectiveness and efficiency of a quality management system, and consequently the potential for improvement of the performance of an organization. When compared to ISO 9001, the objectives of customer satisfaction and product quality are extended to include the satisfaction of interested parties and the performance of the organization.

This International Standard is applicable to the processes of the organization and consequently the quality management principles on which it is based can be deployed throughout the organization. The focus of this International Standard is the achievement of ongoing improvement, measured through the satisfaction of customers and other interested parties.

This International Standard consists of guidance and recommendations and is not intended for certification, regulatory or contractual use, nor as a guide to the implementation of ISO 9001.

This Technical report provides guidelines for the development and maintenance of the documentation necessary to ensure an effective quality management system, tailored to the specific needs of the organization.  The use of these guidelines will aid in establishing a documented system as required by the applicable quality management system standard. This system as required by the applicable quality management system standard.  This Technical Report may be used to document management systems other than that of the ISO 9000 family, for example environmental management systems and safety management systems.

This British Standard specifies requirements for the construction dimensions and mechanical and electrical properties of non- armoured polyvinyl chloride (PVC) insulated cables for operation at voltages up to and including 450 V a.c. to earth and 750 V a.c between conductors, intended for electric power lighting and internal wiring.