Standards
Packaged natural Coconut water - Code of Practice
This Code of Practice establishes the recommendations for the hygienic preparation of packaged natural coconut water inclusive of harvesting, processing, packaging, storing, transporting and distributing.
GCP 30
-
2022
GYD 6,600
26 pages
Specification for Grades of fresh agricultural produce Part 1: Bananas
This standard specifies the quality requirements for bananas grown from Musa spp. (AAA) of the Musaceae family, to be supplied fresh to the consumer, after preparation and packaging. it also specified the requirements for unripened green bananas after preparation and packaging.
This standard specifies the quality requirements for bananas grown from Musa spp. (AAA) of the Musaceae family, to be supplied fresh to the consumer, after preparation and packaging. it also specified the requirements for unripened green bananas after preparation and packaging.
GYS 74
-
2010
GYD 4,000
7 pages
Gas welding equipment — Safety devices- Part 1: Devices not incorporating a flame (flashback) arrestor
This document specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air which do not incorporate a flame (flashback) arrestor used downstream of manifold, cylinder and/or pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This document does not specify the location of these devices in the gas system. This document is not applicable to safety devices which incorporate a flame arrestor, covered by ISO 5175-1.
GYS 142-2
-
2025
GYD 5,500
20 pages
Specification for the storage, handling and transportation of LPG cylinders
This standard applies to the storage and handling of portable containers used for storage of Liquefied Petroleum Gases (LPG) and to the transportation of these containers.
GYS 264
-
2021
GYD 4,000
6 pages
GYS 264
-
2005
GYD 4,000
7 pages
Specification for the storage, handling and transport of steel compressed gas cylinders
This standard
specifies the minimum requirements for the storage, handling and vehicular
transport of steel high pressure compressed gas cylinders and acetylene.
This standard does not cover the storage, handling and transport of ammonia cylinders.
GYS 453
-
2021
GYD 4,000
5 pages
Specification for Natural gas - Quality designation
This national standard specifies the
parameters required to describe finally processed and, where required, blended
natural gas. Such gas is referred to subsequently in this text simply as
“natural gas”.
The main text of this national standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability.
The main text of this national standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability.
The question of interchangeability is dealt with in Annex A (see Clause A.2).
GYS 572
-
2021
GYD 8,300
45 pages
Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
The aim of this part of ISO 15403 is to
provide manufacturers, vehicle operators, fuelling station operators and others
involved in the compressed-natural-gas vehicle industry with information on the
fuel quality for natural gas vehicles (NGVs), required to develop and operate
compressed-natural-gas vehicle equipment successfully.
Fuel meeting the requirements of this part of ISO 15403 should:
(a) provide for the safe operation of the vehicle and associated equipment needed for its fuelling and maintenance;
(b) protect the fuel system from the detrimental effects of corrosion, poisoning, and liquid or solid deposition;
(c) provide satisfactory vehicle performance under any and all conditions of climate and driving demands.
Fuel meeting the requirements of this part of ISO 15403 should:
(a) provide for the safe operation of the vehicle and associated equipment needed for its fuelling and maintenance;
(b) protect the fuel system from the detrimental effects of corrosion, poisoning, and liquid or solid deposition;
(c) provide satisfactory vehicle performance under any and all conditions of climate and driving demands.
Some aspects of this part of ISO 15403 may also be applicable for the use of natural gas in stationary combustion engines.
GYS 573
-
2021
GYD 6,100
25 pages