Standards
Code of Practice for the storage of tyres, inner tubes and flaps
This Code of Practice gives recommendations for storage of tyres, inner tubes and flaps.
This publication was last reviewed and confirmed in 2025. Therefore this version remains current.
GCP 4
-
1997
GYD 3,300
4 pages
Definition of terms used in the pneumatic tyre industry
This Guyana Standard is a glossary which defines terms related to passenger car and commercial vehicle tyres. The standard is divided into six sections dealing respectively with general definitions, definitions related to structure, main components, tyre dimensions, service, injury and repair.
GYS 66
-
1997
GYD 4,400
12 pages
Specification for domestic gas stoves for use with liquefied petroleum gases
This standard specifies construction, operation, safety requirements, labelling and tests for domestic gas stoves with metallic bodies intended for use with liquefied petroleum gases at 2.452 to 3.432 kN/m2 (or equivalent) gas inlet pressure.
GYS 193
-
2017
GYD 8,300
43 pages
Specification for the storage, handling and transportation of LPG cylinders
This standard applies to the storage and handling of portable containers used for storage of Liquefied Petroleum Gases (LPG) and to the transportation of these containers.
GYS 264
-
2021
GYD 4,000
6 pages
GYS 264
-
2005
GYD 4,000
7 pages
Specification for the storage, handling and transport of steel compressed gas cylinders
This standard
specifies the minimum requirements for the storage, handling and vehicular
transport of steel high pressure compressed gas cylinders and acetylene.
This standard does not cover the storage, handling and transport of ammonia cylinders.
GYS 453
-
2021
GYD 4,000
5 pages
Specification for Natural gas - Quality designation
This national standard specifies the
parameters required to describe finally processed and, where required, blended
natural gas. Such gas is referred to subsequently in this text simply as
“natural gas”.
The main text of this national standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability.
The main text of this national standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability.
The question of interchangeability is dealt with in Annex A (see Clause A.2).
GYS 572
-
2021
GYD 8,300
45 pages
Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
The aim of this part of ISO 15403 is to
provide manufacturers, vehicle operators, fuelling station operators and others
involved in the compressed-natural-gas vehicle industry with information on the
fuel quality for natural gas vehicles (NGVs), required to develop and operate
compressed-natural-gas vehicle equipment successfully.
Fuel meeting the requirements of this part of ISO 15403 should:
(a) provide for the safe operation of the vehicle and associated equipment needed for its fuelling and maintenance;
(b) protect the fuel system from the detrimental effects of corrosion, poisoning, and liquid or solid deposition;
(c) provide satisfactory vehicle performance under any and all conditions of climate and driving demands.
Fuel meeting the requirements of this part of ISO 15403 should:
(a) provide for the safe operation of the vehicle and associated equipment needed for its fuelling and maintenance;
(b) protect the fuel system from the detrimental effects of corrosion, poisoning, and liquid or solid deposition;
(c) provide satisfactory vehicle performance under any and all conditions of climate and driving demands.
Some aspects of this part of ISO 15403 may also be applicable for the use of natural gas in stationary combustion engines.
GYS 573
-
2021
GYD 6,100
25 pages