Standards
This publication:
- Provides technical guidance on the storage and dispensing of petroleum products including petrol, diesel, autogas (also known as LPG) and biofuels (blends of petrol or diesel containing up to 10 % biomass derived component), used as fuels for motor vehicles, primarily at filling stations to which the general public have access.
- Covers civil, mechanical, hydraulic and electrical installation issues for the planning, design, construction, commissioning, modification, maintenance and decommissioning of filling stations.
- Provides information aimed at minimizing the risks from fire and explosion, to safety, health and to the environment.
- Describes good practice and certain legal requirements, particularly those applicable in the UK.
- Is primarily intended to be applicable to both new sites and existing sites that are modified/refurbished. The guidance should also be useful in providing a benchmark to assist the duty-holder to undertake periodic review of their risk assessment(s) required under specific legislation applying to the facilities.
- Provides general principles that may be applicable to other types of installation where fuels are stored and dispensed for non-retail use.
Prescribes the requirements for metric capacity measures of cylindrical and conical shapes. It is intended for use by manufacturers in manufacturing Metric Capacity Measures thus ensuring all measures of a specified type and capacity will have the same dimensions. These measures are intended for use in normal commercial transactions and are for use in measuring liquids only. 7p. (Price Code B)
1.1 This standard specifies:
(a) requirements for the manufacturing, alloying and testing of gold articles of 23, 22, 20, 18, 15, 14, 12, 10 and 9 kt gold;
(b) requirements for findings and solders to be used in the manufacture of gold articles;
(c) methods for assaying gold, alloyed gold, solder, findings and gold articles;
(d) non-destructive testing of gold articles by X-ray fluorescence spectroscopy (XRF); and
(e) requirements for making and labelling of imported gold articles.
NOTE 1 It does not specify requirements for design of gold articles and does not apply to gold articles intended for industrial purpose such as dentistry, electronics, official coins, gold bars and other such uses.
This standard specifies:
a a) requirements for the manufacturing, alloying and testing of gold articles of 23, 22, 20, 18, 15, 14,12, 10 and 9 kt gold;
b b) requirements for findings and solders to be used in the manufacture of gold articles;
c c) methods for assaying gold, alloyed gold, solder, findings and gold articles; and
d d) requirements for marking and labelling of imported gold articles.
NNOTE It does not specify requirements for design of gold articles and does not apply to gold articles intended for industrial purposes such as dentistry, electronics, official coins, gold bars and other such uses.
This standard specifies inter alia conversion factors to be used in converting quantities measured in Imperial to SI and other units. It sets out procedures for the uniform use for these conversion factors. It is intended for use in everyday operations in government commerce, industry, education certain branches of technology and sport.
This International Standard gives specifications for the angular coordinate system to be used in the design of scales, reticles or other display means incorporated in instruments for determining optical data on human eyes or corrective lenses for human eyes.
This Standard specifies the requirements and the materials used in the manufacturing of scales and masses.
This standard specifies legal metrology requirements for labelled packaged commodities with constant nominal content and subject to international trade. It also covers sampling plans for net content verification of goods declared in units of mass or volume.