Standards

This publication:

-                      Provides technical guidance on the storage and dispensing of petroleum products including petrol, diesel, autogas (also known as LPG) and biofuels (blends of petrol or diesel containing up to 10 % biomass derived component), used as fuels for motor vehicles, primarily at filling stations to which the general public have access.

-                      Covers civil, mechanical, hydraulic and electrical installation issues for the planning, design, construction, commissioning, modification, maintenance and decommissioning of filling stations.

-                      Provides information aimed at minimizing the risks from fire and explosion, to safety, health and to the environment.

-                      Describes good practice and certain legal requirements, particularly those applicable in the UK.

-                      Is primarily intended to be applicable to both new sites and existing sites that are modified/refurbished. The guidance should also be useful in providing a benchmark to assist the duty-holder to undertake periodic review of their risk assessment(s) required under specific legislation applying to the facilities.

-                      Provides general principles that may be applicable to other types of installation where fuels are stored and dispensed for non-retail use.

This standard specifies the requirements for the labelling of garments sold in Guyana whether locally made or imported.  It applies to labels and descriptions to be used on garments classified as follows:  shirts; t-shirts; jerseys; blouses; skirts; pants; short-pants; school uniforms; swimwear; dresses and all other garments.

This standard specifies the requirements for labelling and advertising of textiles and certain consumer textiles products. It applies to: (a) labels which are to be sold with textiles at retail or wholesale outlets, and descriptions of textiles used in advertisements; (b) all household textile articles, such as draperies, floor coverings, furnishings, beddings, accessories to the foregoing and other textile goods of a type customarily used in institutions and households; and (c) textiles sold by length (including narrow fabrics), to articles used for stuffing, filling or padding, to threads and cordage. It does not apply to the labelling of garments, hair pieces, and all other items of wearing apparel, costumes and accessories.

This standard establishes a system of graphic symbols, intended for use in the permanent marking of textiles, providing information essential for their “proper care”. Symbols are provided for the following treatments: washing, chlorine bleaching, ironing, dry-cleaning and drying. It also specifies the use of these symbols in care labelling.

This publication was last reviewed and confirmed in 2025. Therefore this version remains current.

This test method is intended to classify fabrics for ironing purposes.  It involves ironing of the cloth specimens with a heated aluminium block at increasing temperatures and examination for changes in handle and appearance.  The fabrics may then be labelled in accordance with the ironing section of this code in terms of the test temperatures they will withstand as indicated below:

            Up to and including 110°C              COOL IRON

            Up to and including 150°C              WARM IRON

            Up to and including 200°C             HOT IRON

This standard specifies a system of designating the sizes of ladies outerwear garments, the control dimensions on which the size designation is based and the method of indicating these dimensions on the label. This standard also specifies body dimensions related to each size, as stated in Appendix A.

This standard establishes a system of designating the sizes of children’s outerwear garments. The control dimensions on which the size designation is based and the method of indicating these dimensions on the label are specified. The standard also includes body dimension tables which specify the dimensions related to each size.

This standard describes exhaust emission requirements for all new domestic and commercial vehicles which have been registered in Guyana for the first time after December 31, 1997. This standard also describes exhaust emission requirements, measurement methods and measurement equipment for all vehicles, which are imported into Guyana after December 31, 1997. All imported vehicles would be required to conform to exhaust emission limits specified in the standard. Accordingly, the exhaust emission limits must be fully documented and certified by the suppliers/manufacturers, from the country of origin.

 This standard establishes the basic principles for carrying out vibration measurement and processing data, with regard to evaluating vibration effects on buildings. The evaluations of the effects of building vibration are primarily directed at structural response, and include appropriate analytical methods where the frequency, duration and amplitude can be defined. It only deals with the measurement of structural vibration and excludes the measurement of   airborne sound pressure and other pressure fluctuations. 

This standard provides general guidance on methods of carrying out penetrant inspection on materials and components both during manufacture and in service. It does not deal with acceptance or rejection. Penetrant inspection is used to locate discontinuities, such as laps, folds, cracks, porosity and fissures, which are open to the surface of a material or component. Penetrant techniques can be used on materials irrespective of their physical properties, provided that the surface is normally non-absorbent and compatible with the penetrant process.