This recommended practice (RP) sets criteria for the design, construction, testing, operation, and maintenance of offshore steel pipelines used in the production, production support, or transportation of hydrocarbons; that is, the movement by pipeline of hydrocarbon liquids, gases, and mixtures of these hydrocarbons with water. This RP may also be used for water injection pipelines offshore. The RP also applies to any transportation piping facilities located on a production platform downstream of separation and treatment facilities, including meter facilities, gas compression facilities, liquid pumps, associated piping, and appurtenances. The design, construction, inspection, and testing provisions of this RP may not apply to offshore hydrocarbon pipelines designed or installed before this latest revision of the RP was issued. The operation and maintenance provisions of this RP are suitable for application to existing facilities. 

This recommended practice is based on global industry best practices and serves as a guide for those who are concerned with the design and construction of new fixed offshore platforms and for the relocation of existing platforms used for the drilling, development, production, and storage of hydrocarbons in offshore areas.

This standard is available for purchase at the API Publication Store:https://www.apiwebstore.org/standards/2A-WSD 

This standard provides requirements for the installation and testing of blowout prevention equipment systems on land and marine drilling rigs (barge, platform, bottom-supported, and floating). This includes but is not limited to: BOPs (blowout preventers), Choke and kill lines, Choke and manifolds, Control systems, Auxiliary equipment. The primary functions of these systems are to confine well fluids to the wellbore, provide means to add fluid to the wellbore, and allow controlled volumes to be removed from the wellbore.

This standard does not apply to: Diverters, shut-in devices, and rotating head systems, as these systems are designed to safely divert or direct flow rather than to confine fluids to the well bore.

This standard is intended to be used together with API RP 59.

This standard can be purchase via the American Petroleum Institute (API) https://www.apiwebstore.org/standards/53 

This standard applies to wells drilled in a deep-water environment and is intended to improve the safety of operations and minimize the possibility of loss of well control fluids or damage to the environment in relation to drilling, completions, suspension, production and abandonment.

This standard can be purchase via the American Petroleum Institute (API)https://www.apiwebstore.org/standards/96 

This standard provides requirements for the installation and testing of blowout prevention equipment systems on land and marine drilling rigs (barge, platform, bottom-supported, and floating). This includes but is not limited to: BOPs (blowout preventers), Choke and kill lines, Choke and manifolds, Control systems, Auxiliary equipment. The primary functions of these systems are to confine well fluids to the wellbore, provide means to add fluid to the wellbore, and allow controlled volumes to be removed from the wellbore.

This standard does not apply to: Diverters, shut-in devices, and rotating head systems, as these systems are designed to safely divert or direct flow rather than to confine fluids to the well bore.

This standard is intended to be used together with API RP 59.

This standard can be purchase via the American Petroleum Institute (API) https://www.apiwebstore.org/standards/53 

This code of practice gives recommendations and guidance on the use of IRATA International rope access methods, including training, to provide a safe system of work. It is intended for use by IRATA International members, IRATA International rope access technicians, national or regional enforcement agencies, safety officers and those who commission rope access work, e.g. building contractors; multi-national oil and gas companies; the renewable energy sector. This code of practice is applicable to the use of IRATA International rope access methods for industrial purposes, i.e. for access to buildings, other structures (on or offshore) or natural features, such as cliff faces, where ropes are used as the primary means of access, egress or support and as the primary means of protection against a fall. This code of practice is not intended to apply to the use of rope-based access methods for leisure activities, arboriculture, general steeplejack methods or emergency personal evacuation systems, or to the use of rope-based access (line rescue) techniques by fire brigades and other emergency services for rescue work or for rescue training. NOTE Throughout this code of practice, the term rope access is intended to mean rope access for industrial purposes, unless otherwise stated.

This International Code of Practice for Industrial Rope Access Systems’ is freely available on the IRATA  website to anyone who wishes to access it. Please see the following links:

• The IRATA website – irata.org

• IRATA freely available publications - Publications | IRATA International

• Access to the document (ICOP) - ‘IRATA International Code of Practice for Industrial Rope Access’